The Taper Mount Direct Thread Adaptor offers a immediate thread interface for taper mounted suppressors. Two units of wrench flats make it equally easy to attach or take out from the suppressor or your firearm’s muzzle threads. No proprietary tools essential. Obtainable in 1/2×28 and 5/8×24 with 18x1mm support just around the corner. While it is comfortable to have immediate thread suppressor ability that may move from host to host without the need for extra muzzle equipment, it is crucial to remember that all host firearm should be checked for baffle alignment via visual inspection before firing.
The 1/2×28 Insert can be utilized with cartriges up to 30 caliber and the 5/8×24 works extremely well up 
to .338 caliber.
The use of direct thread adaptors boosts on direct thread mounted suppressors, by allowing the end user to have modular thread pitches. One Taper Attach Suppressor to Rule ALL OF THEM.
Black Nitrided
1.5 Ounce Weight
Wrench Flats for each and every contingency
Taper Mount Repeatability and Stability
Multi-Thread versatility for your Taper Attach Suppressor
taper adapters allow the utilization of holders or equipment with a different machine-side taper then your machine spindle taper, such as utilizing a BT40 tapping chuck on a 50-taper spindle.
These adapters eradicate lead period losses in case of a equipment breakdown. Adapters may also assist in testing custom tools on another machine compared to the planned production machine.
Taper adapters avoid the need for a supply of new holders or tools for a particular machine. They arrive ready to apply with built-in locked clamping mechanisms featuring a clamping screw on a ball Taper Adapter bearing for steep taper clamping or HSK locking unit for taper clamping.
The steep taper may be the standardised form of a tool taper for clamping tools in the main spindle of a machine tool
The steep taper is standardised in DIN 69871 part 1
No self-locking (in contrast with the Morse taper), thereby making tool alterations easier without clamping. This is especially significant for automatic tool changes
Little clamping travel equals brief clamping time
High torsional rigidity as a result of short distance between the leading edge and spindle bearing (brief overall length)
For adapting morse taper equipment to milling machines that take R8 tools
Alloy steel hardened to 50-52 rc
Critical surfaces precision ground
Use in R8 Machines
Turning Tools More taper lowering sleeve is employed to convert your headstock from #2 MT to #1 MT. This is useful if you have a travel center or pen mandrel which is definitely 1MT as well as your headstock is 2MT