Additional Features:
Made of Steel
For use with cast iron bushed bore pulley
This U1 Bushing with 5-1/2″ bore is a high-quality precision product that is built for sturdiness and strength. U1 bushings are used in an extensively wide range of applications, which includes; sprockets, shaves, pulleys, gears, plus much more, we as well offer all of these items. What pieces this bushing apart is the high-quality steel development along with precise manufacturing and top quality control; this ensures that you always get yourself a premium quality consistent product. What really units us apart from the other fellas is our highly trained expert workers and our company-wide objective of customer satisfaction.
1. Be certain the tapered cone floors of the bushing and the within of the driven merchandise are clean and free of anti-seize lubricants.
2. Place the bushing in sprocket or various other component type that accepts the bushing.
3. Place cap screws loosely in pull-up holes. The bushing continues to be loose to assure sliding fit on shaft.
4. With essential on shaft, 
slide the sprocket or other portion type to the desired situation on the shaft. Make sure you leave the heads of the cap screws attainable.
5. Align the sprocket or component type, tighten the screws on the other hand and progressively until they will be pulled up tight. Do not employ extensions on the wrench handles and do not allow the sprocket or component to end up being drawn i contact with flange of bushing. At this point there must be a gap between the bushing flange and sprocket, make sure this gap does not close.
Twice split barrel ensures concentricity
Grips the shaft with positive clamp fit
High torque carrying capacity
Permits blind assembly
Load not carried or tied to mounting screws
External key of all sizes for great drive and greater torque carrying capabilities
Double-split barrel for great clamping
Solid flange to keep up concentric bores
Available in in ., metric, and spline bores. Bore range between 3/8″ to 10″
Solid Flange & Twice Split Barrel – Assures better concentricity to the shaft.
Key to Key Drive – With keys upon both the shaft and product to supply the strongest possible travel.
3/4″ per Foot Taper on Barrel – Self locking taper supplies the highest degree of mechanical locking item to product.
Taper bushing are widely used together with sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are constructed with high quality engineered supplies with great tolerance. The feature is easy to apply and needs no more alteration. These bushings can match almost a myriad of assemblies and sizes. They will be the best choice in design for mechanical connections.
To complete designations put bore size. For example: PD1215X16MM designates a 1215 taper bushing with a 16mm bore.
No costly re-boring: total range of both metric and imperial offered.
Standard range fits up to 125mm/5″ shafts & Hub diameter required depends upon the application.
Complete short reach range offered, for compact light-weight assemblies & Clean, Compact Style.
Ease of installation and removal.
This Split Taper Bushing was created exclusively for use with cast iron bushed bore pulleys and will be purchased on a single page as the pulley you will need.
For use with 1 3/16” shaft sizes.
Comes with 2 set screws.