electric motor slide rails，Slide Rails:The main purpose of a slide rail is to permit the customer to modify the motor’s position to insure proper stress on the belting apparatus.
Construction/Installation:
The Slide Rail is a two piece steel mounting apparatus which uses one rail for the front or pulley end foot and the other for the trunk or opposite end ft. When setting up, the rails should be securely anchored as near to its operating position as possible with the proper distance between your front and back mounting bolt.
motor slide bases are rigidly bolted to prelocated and fixed anchor bolts in apparatus bases and provide a way of anchoring motors and adjusting belt stress in belt-sheave connected drive systems.
Model motor slide bases provide engine anchorage and position adjustment for use with fan-motor units having belt and sheave connected drive apparatus, when mounted upon Kinetics Model CIB-L, CIBH, SFB, or KFB equipment bases.
Model electric motor slide bases add a solitary steel frame with four sliding engine anchor bolt, nut and washer assemblies, operate by a single belt tension adjustment bolt, on tabulated base sizes up to 286, and two bolts for bases 324 through 445. All engine slide bases have four anchor bolt holes for attachment to supporting equipment bases.
Model electric motor slide bases are more advanced than twopiece engine slide rails. Motor slide bases are more rigid than rail systems and assure that sliding motor anchor bolts are installed and remain parallel.
Specifications
Model motor slide bases shall contain an individual frame steel electric motor mounting foundation and shall have four sliding electric motor anchor bolts, operated by one axis belt tension adjustment bolt, and shall have four anchor bolt holes for attachment to equipment support bases.
Engine slide bases, to be supported by cement or steel framework bases used as part of the noise and vibration isolation of the equipment, shall be furnished by the same manufacturer as the equipment support bases and will be sized as required for motors to be mounted.
Usual applications include use with fan-motor models having NEMA or AMCA motor positions W, X, Y, or Z. Engine slide bases allow maximum motor adjustment for setting and adjusting belt stress to eliminate excessive belt and apparatus bearing wear.
Availability:
Slide Rails could be supplied for horizontal frames 180T – 6800. The rails are created for a particular frame series, (364T and 365T use the same rails).
Electric Motor Slide Rails
All Torque Transmissions stocks electric engine slide rails and engine bases, which are for the quick tension of belt drives and various other motor positioning requirements. Made from cast iron, slide rails arrive complete with all electric motor mounting hardware and so are ready for immediate set up.
Electric Motor Slide Rails
All Torque Transmissions stocks electric motor slide rails and electric motor bases, which are for the quick tension of belt drives and various other motor positioning requirements. Created from cast iron, slide rails come complete with all motor mounting hardware and so are ready for immediate set up.
nce 01.01.2017 new rules in europe
IE3 – motors with superior efficience from power 0,75 kW at 2poles/3000 Upm 4poles/1500 Upm 6poles/1000 Upm.
Exceptions:
* 8poles/750 Upm
* you can require IE2 motors with electronic inverters
Slide the electric electric motor.
Tensioner for belts or function as variator
Use these slide rails to position mounted NEMA and NEC motors pertaining to proper belt tension during installation and at later maintenance checks. They’re ideal for motor belt adjustments in fan, blower, pump, and compressor applications. Note: Not for ceiling or part wall installations.
linear module, two manuals and two sliders, with high precision, multi-segment replicate positioning, compact structure, solid versatility.
Maximum stroke: 1050mm
Repeat accuracy: +-0.01mm
Maximum speed: 1600mm/s
Easy maintenance
Long stoke without reducing speed
High rigidity mainframe and cover: a single pieceestruded aluminum structure for ideal rigidity and weight ratio.
It can be used in combination with solitary or multiple axes. It really is easy to match the required workpieces in various industries and it turns into a simple and useful mechanical arm. It is mainly utilized in dustfree workshops or special fields such as electronics and medical tools, such as for example film, Depreciation, IC printing, CCD on-line inspection, specific positioning detection of soldering automation products, laser plus(laser cutting/laser marking/laser engraving/laser drilling,etc.) precision assembly, precision machine tools, semiconductor production equipment, area detection, electronic production gear , and 3D printing products and other fields.
Compared with belt or ball screw drive linear module, all of us called linear electric motor 
“Zero Transmition” because it’s driven directly simply by a servo electric motor. Since there are no intermediate rotation components, the energy reduction during mechanical friction is certainly eliminated and transmission efficiency is significantly improved. Linear motor can perform high speed immediately when starting actually under high repeat accuracy 0.002mm condition. Due to the special benefit, the stroke could be extended indefinitely. So that it is widely used in various high precision industries. We believe linear motor is a new inclination in automation machine sector, making better in future.
Ever-power linear modules are applied in multiple areas, including robots, camera monitor, laser engraving and trimming, glue dispenser, 3D printer, aerospace,laboratory test, scanning, indexing and positioning, moving sensors, automation, factory conveyor etc.
You can expect motorized stages that can be assembled into many different configurations; for example, XY stages, XYZ phases . We list several common XY stage combinations right here, but you can choose your own mixture of family, travel and lead screw pitch in each axis to build the stage you need.
1.High rigidity and heavy load
2.Smooth working, low noise and non-pollution,high speed
3.High accurancy and easy establishing
4.Trial order can be acceptable
Linear bearings and guides provide low friction, smooth, accurate motion for almost any moment or regular loading condition.
1.Powerful and static friction resistance difference is certainly small, which is effective to enhance the response speed and sensitivity of CNC system
2.The driving power is small which reduces the energy consumption
3.High positioning accuracy and repeat positioning ccuracy
4.By increasing the preload, the rigidity is greatly enhanced
5.Using paired instruction rails, it has the effect of homogenizing error
Maximum stroke: 1050mm
Repeat accuracy: +-0.01mm
Easy maintenance
Lengthy stoke without reducing speed
High rigidity mainframe and cover: one pieceestruded aluminum structure for optimum rigidity and weight ratio. Robotic arms , 3D printer devices , CNC router machines , Pick and place machines
Glue dispenser , Painting devices , Packing machines , Coding devices , Gantry Robot
Laser engraving and slicing machines ……
Linear bearings and guides provide low friction, smooth, accurate motion for almost any moment or normal loading condition.
1.Powerful and static friction resistance difference is small, which is helpful to improve the response speed and sensitivity of CNC system
2.The driving power is small which reduces the energy consumption
3.High positioning accuracy and repeat positioning ccuracy
4.By increasing the preload, the rigidity is greatly improved
5.Using paired instruction rails, it has the effect of homogenizing error
Linear bearings and guides provide low friction, easy, accurate motion for almost any moment or regular loading condition.
1.Dynamic and static friction resistance difference is usually small, which is effective to enhance the response speed and sensitivity of CNC system
2.The traveling power is small which reduces the energy consumption
3.High positioning accuracy and repeat positioning ccuracy
4.By increasing the preload, the rigidity is greatly improved
5.Using paired guideline rails, it gets the aftereffect of homogenizing error