Fan Electric motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, taken off unused 18” or 24” China Air Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor comes with a (detached) 
cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring between your electric engine, capacitor and quickness control change is still installed nevertheless the cord itself is normally detached as seen in the photos. (Discover “Control Notice” below for change type.)
T (See “Program Notice” below for make use of in a variety of other applications.)
Dimensions: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft can be½” (0.500″) diameter x 2 ½” lengthy with a collection screw soft. There are (4) threaded mounting lugs on the front of the motor, ½” long x .16 dia. with washers and nuts. The studs appear to have got 4mm threads and to end up being on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to another).
Rate: The approximate engine speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electric powered motor) is Clockwise.
Control Take note: Motors may come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH variations in the images). These two types of switches both control the engine just as (but you have a rotating knob and you have a pull-chain). If you order several engine at a time, we will do our best to supply your purchase with each one kind of control or the additional.
Application Note: USUALLY DO NOT use this electric electric motor in a nonfan application. This is a completely enclosed fan electric electric motor and made to have Electric Fan Motor continuous ventilation over the motor casing for cooling. The casing isn’t vented and the electric powered engine will overheat and get into automatic thermal overload if run in a nonfan system where there isn’t strong ventilation past the electric motor. (Caution Note: the electric motor will restart immediately when it cools cool off.) Using this electrical motor for applications aside from 18 & 24″ TPI fans could also overload the motor and lead it to proceed into automated thermal overload. (Your companion blade from another manufacturer may possess a steeper blade position.)
Origin: This electric electric motor is manufactured in China.