Drive sprocket

A chain and sprocket drive is a kind of power transmission in which a roller chain engages with several toothed wheels or sprockets, used in engines as a drivefrom crankshaft to camshaft.
Ever-electrical power is proud to share a wide selection of Sprockets along with this huge selection of agriculture, gardening, cooking and outdoor products. We stand behind all 26,000 products we sell with this Satisfaction Guarantee. CUSTOMER SUPPORT may be the cornerstone of our family business, and has been for over 50 years.
Ever-power drive sprockets provide rugged, reliable service and show replaceable tooth plates for convenient field repair. Tooth plates for 102 and 142 series chain are available with a segmental/symmetrical reversible tooth profile. The 142 DBL, TPL as well as the 175 and 260 series use our non-symmetrical profile.
Drive sprockets weren’t always designed to be bolted in. At one time they were welded onto the final drive motor and had to be trim off if they were replaced. Ultimately, welded-on adapters were installed that allowed the sprocket to be bolted on, and newer designs use the bolted approach altogether.
When someone sends in a final drive motor for all of us to have a look at or?rebuild/reman, we advise them to remove the sprocket. We don’t will need the sprocket in spot to evaluate the motor and the added weight (which may be significant) unnecessarily boosts your shipping costs.
Signs of Sprocket Wear
The teeth on a drive sprocket are where you search for wear . They must be tall and smooth by the end, not sharpened or dished by the end. And the sprocket, and even more specifically its teeth, start to wear, its size becomes smaller. This causes what is known as a pitch mismatch, where the teeth on the sprocket no longer interact with the track chain sprocket backlinks as effectively. This can accelerate the have on of the sprocket and decrease the efficiency of your devices.
If your sprocket shows sign of excessive wear, then its time to displace it before it starts to cause abnormal track wear or begins to negatively affect the performance of your final drive motor.
Preventing Sprocket Wear
Among the key methods to prevent accelerated sprocket dress in is to check the track stress. If the strain is too tight, it’ll cause use on the sprocket the teeth. We’ve talked before about the value of keeping the undercarriage clean, and the condition of the undercarriage make a difference the track tension (especially if there is definitely a build up of dried mud and debris). That’s area of the cause we put so much emphasis on keeping the undercarriage clean
With out a functioning drive sprocket, your track drive won’t be able to propel your machine. Fortunately, there are ways to help your drive sprocket last longer: keep the track stress at a proper level and hold your undercarriage clean.
The undercarriage of your track equipment ought to be inspected regularly. If you find early wear or harm to your tracks, a put on sprocket may be the cause.
15 cogs / teeth
16.77 inches in diameter
12 equally spaced bolt holes
Fits the next Bobcat Compact Monitor Loaders: T180, T190, T550, T590
Parts can vary based on your serial number.
All Ever-electric power sprocket tooth profiles are induction hardened to 55 Rockwell C., and are replaceable. The substitute and repair of tooth plate segments will not require removal of the drive shaft, bearings, etc. Ever-power also designs custom split hub parts for retrofit applications that minimize field labor costs.
At 1st glance, you might feel that if you’ve seen one drive sprocket, you’ve seen them all. However, Ever-electrical power features added an I.D. lip and spiral band that captivate the needle bearing along with an external snap ring that boosts performance and stability. While easy to overlook, it’s this focus on fine detail that the racer offers come to anticipate from Ever-power.
An We.D. lip and spiral band that captivate the needle bearing
External snap ring caps sprocket upon drum & increases durability
CNC-machined teeth feature a corrosion-resistant finish
Chain Type: #219
Tooth Configuration: Standard


Find us

Ep Screw Jack Co., Ltd.

Mail: [email protected]

As one of leading manufacturers, suppliers and exporters of mechanical products in China, We offer reducers, sprockets, industrial and conveyor chain, belts, pulleys, gears, racks, gearboxes, motors, PTO Shafts, taper lock Bushing, vacuum Pumps, screw air compressors and many other products. Please contact us for details.

Recent Posts