China 270Hp 200Kw 7Bar 34.5m3min Water Cooling Industrial Screw Air Compressor for Filter Press wheel and axle

Applicable Industries: General Industry
Showroom Location: Egypt, Viet Nam, Philippines, Brazil, Indonesia, Pakistan, India, Russia, South Africa, Malaysia, Australia
Condition: New
Type: Screw
Configuration: Stationary
Power Source: AC POWER
Lubrication Style: Lubricated
Mute: Yes
Model Number: ERC-270SA
Voltage: 220V/230V/380V/400V/415V/440V/460V/600V/Customized
Dimension(L*W*H): 2850*1700*2000(mm)
Weight: 4400kg
Warranty: 18 Months
Working Pressure: 7 bar, 8 bar, 13 bar, 10 bar
Air capacity: 23.5 – 34.5 m3/min
Machinery Test Report: Provided
Video outgoing-inspection: Provided
Marketing Type: Ordinary Product
Warranty of core components: 1.5 years
Core Components: PLC, Gear, Motor, Bearing
Gas Type: Air
Product name: 270Hp 7Bar 34.5m3/min Water Cooling Industrial Screw Air Compressor
Air end: GHH/Aerzen/ELANG
Cooling Method: Both Air/Water Cooling Available
Driven Method: Driect driven/Shaft Couping/ Gear
OEM / ODM: Offered
Protection grade: IP54/IP55
Insulation Class: F
Working pressure: 1.5bar to 40bar customized
Touch Screen: English, Spanish, Russia, etc
Filters: Donaldson/MANN
After Warranty Service: Video technical support, Online support
Local Service Location: Egypt, Viet Nam, Philippines, Brazil, Indonesia, Pakistan, India, Russia, Farm machinery tractors pto 600L hydraulic boom sprayer for sale rod spray machine Malaysia, Australia, South Africa
After-sales Service Provided: Field maintenance and repair service
Certification: ISO9001, CE, TUV, ASME, BV, SASO, GC, etc
Packaging Details: Standard exporting packing for 270Hp 200Kw 7Bar 34.5m3/min Water Cooling Industrial Screw Air Compressor for Filter Press.
Port: ZheJiang , any port in China

270Hp 200Kw 7Bar 34.5m3/min Water Cooling Industrial Screw Air Compressor for Filter Press Product Name:270Hp 200Kw 7Bar 34.5m3/min Water Cooling Industrial Screw Air Compressor for Filter Press Working Pressure: 7 – 13bar (100 – 181psi) Air Delivery: 23.5 – 34.5m3/min Type of Driving: Direct Driven Type of Cooling:Air Cooling/Water Cooling Dimension: 2850*1700*2000mm Weight: 4400kg Output pipe Diameter: DN80 There are more parameters below.

Advantages

  1. Large displacement: Displacement 10% higher than ordinary piston compressor.
  2. Energy-saving: Compared with piston air compressor, this series of models for the new national standard 2 energy efficiency products, excellent energy saving.
  3. Easy to operate: 24 hours unattended all day work, free load automatically start, full load automatically shut down.
  4. Strong stability:Under long time working, displacement and pressure stable, no crash phenomenon, low failure rate.

ModelWorking PressureAir DeliveryMotor PowerType of DrivingType of CoolingDimension(mm)Weight(kg)Output pipe Diameter
psigbarcfmm3/minkw/hpLWH
ERC-30SA1007134.23.822/30Direct drivenAir Cooling/Water Cooling1380850115064011/4″
1168127.13.6
14510113.03.2
1811388.32.5
ERC-40SA1007187.15.330/401450900122090011/4″
1168176.65
14510151.84.3
18113127.13.6
ERC-50SA1007233.06.637/50159510001365106011/2″
1168218.96.2
14510201.35.7
18113162.44.6
ERC-60SA1007282.5845/60159510001450115011/2″
1168271.97.7
14510243.66.9
18113211.96
ERC-75SA1007370.810.555/7521001250170017502″
1168346.09.8
14510307.28.7
18113257.87.3
ERC-100SA1007480.213.675/10021001250170018402″
1168459.013
14510399.011.3
18113356.610.1
ERC-120SA1007572.016.290/12021001250170020302″
1168543.815.4
14510466.113.2
18113395.511.2
ERC-150SA1007734.420.8110/1502545145019002920DN65
1168688.519.5
14510582.616.5
18113483.713.7
ERC-175SA1007847.424132/1752545145019003200DN65
1168812.123
14510706.220
18113547.315.5
ERC-200SA1007981.627.8160/2002790155020003600DN65
1168918.126
14510829.823.5
18113688.519.5
Motor Efficiency Class: Ultraefficient/IE3/IE2 as per your requiredMotor Protection Class: IP23/IP54/IP55 or as per your requiredCertification: CE/ISO9001/TUV/UL/SGS/ASMEVoltage: 380V/3PH/50HZ/60HZ, 220V/3PH/50HZ/60HZ, 400V/3PH/50HZ/60HZ, 440V/3PH/50HZ/60HZ, pto shaft yoke parts 415V/3PH/50HZ/60HZ, 230V/3PH/50HZ/60HZ, dual voltage is also ok
ModelWorking PressureAir DeliveryMotor PowerType of DrivingType of CoolingDimension(mm)Weight(kg)Output pipe Diameter
psigbarcfmm3/minkw/hpLWH
ERC-250SA10071147.632.5185/250Direct drivenAir Cooling/Water Cooling2790155020003780DN65
11681094.631
14510918.126
18113762.721.6
ERC-270SA10071218.234.5200/2702850170020004400DN80
11681165.233
14510988.728
18113829.823.5
ERC-300SA10071341.838220/3003150200021204930DN100
11681288.836.5
145101129.932
18113953.427
ERC-330SA10071518.343250/3303150200021205450DN100
11681430.140.5
145101288.836.5
181131129.932
ERC-375SA10071818.551.5280/3754000200021006150DN125
11681765.550
145101589.045
181131306.537
ERC-420SA10071977.456315/4204600230024007500DN125
11681942.155
145101730.249
181131447.741
ERC-470SA10072259.864355/4704600230024008100DN150
11682189.262
145101906.754
181131624.346
ERC-550SA10072577.673400/5505000235024008400DN150
11682471.770
145102153.961
181131836.152
ERC-600SA10072860.181450/6005500259028009000DN150
11682789.579
145102471.770
181132083.359
ERC-670SA10073142.689500/6705500259028009500DN200
11683072.087
145102718.977
181132365.867
ERC-750SA10073601.6102560/75065002700300010000DN200
11683460.498
145103072.087
181132718.977
Motor Efficiency Class: Ultraefficient/IE3/IE2 as per your requiredMotor Protection Class: IP23/IP54/IP55 or as per your requiredCertification: CE/ISO9001/TUV/UL/SGS/ASMEVoltage: 380V/3PH/50HZ/60HZ, 220V/3PH/50HZ/60HZ, 400V/3PH/50HZ/60HZ, 440V/3PH/50HZ/60HZ, 415V/3PH/50HZ/60HZ, 230V/3PH/50HZ/60HZ, dual voltage is also ok

Q1.Why customer choose us?
A:ELANG INDUSTRIAL (ZheJiang ) CO., LTD., with 18 years old history, we are specialized in Rotary Screw Air Compressor. Germany Standard and 10years exporting experience help us won more than 50 loyal foreign agents. We warmly welcome your small trial order for quality or market test.
Q2.Are you a manufacturer or trading company?
A:We are professional manufacturer with big modern factory in ZheJiang ,China.Both OEM & ODM service can be accepted.
Q3.What’s your delivery time?
A:Generally 3 to 7 days, if urgently order, pls contact our sales in advance.
Q4.How long is your air compressor warranty?
A:One year for the whole machine and 2 years for screw air end, except consumble spare parts.
Q5.How long could your air compressor be used?
A:Generally, more than 10 years.
Q6. What’s payment term?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we could accept USD, RMB, Euro and other currency.
Q7.How about your customer service?
A:24 hours on-line service available. 48hours problem sovled promise.
Q8.How about your after-sales service?
A:1. Provide customers with intallation and commissioning online instructions. 2. Well-trained engineers available to overseas service. 3. CZPT agents and after service avaiable.arrange our engineers to help you training and installation.

Screw Shaft Types

A screw shaft is a cylindrical part that turns. Depending on its size, it is able to drive many different types of devices. The following information outlines the different types of screws, including their sizes, material, function, and applications. To help you select the right screw shaft, consider the following factors:
screwshaft

Size

A screw can come in a variety of shapes and sizes, ranging from a quarter to a quarter-inch in diameter. A screw is a cylindrical shaft with an inclined plane wrapped around it, and its main function is to fasten objects together by translating torque into a linear force. This article will discuss the dimensions of screws and how to determine the size of a screw. It is important to note that screw sizes can be large and small depending on the purpose.
The diameter of a screw is the diameter of its shaft, and it must match the inner diameter of its nuts and washers. Screws of a certain diameter are also called machine screws, and they can be larger or smaller. Screw diameters are measured on the shaft underneath the screw head. The American Society of Mechanical Engineers (ASME) standardized screw diameters in 3/50-inch to 16 (3/8-inch) inches, and more recently, sizes were added in U.S. fractions of an inch. While shaft and head diameters are standardized, screw length may vary from job to job.
In the case of the 2.3-mm screw group, the construct strength was not improved by the 1.2-mm group. The smaller screw size did not increase the strength of the construct. Further, ABS material did not improve the construct strength. Thus, the size of screw shaft is an important consideration in model design. And remember that the more complex your model is, the larger it will be. A screw of a given size will have a similar failure rate as a screw of a different diameter.
Although different screw sizes are widely used, the differences in screw size were not statistically significant. Although there are some limitations, screws of different sizes are generally sufficient for fixation of a metacarpal shaft fracture. However, further clinical studies are needed to compare screw sizes for fracture union rates. So, if you are unsure of what size of screw shaft you need for your case, make sure to check the metric chart and ensure you use the right one.
screwshaft

Material

The material of a screw shaft plays an important role in the overall performance of a screw. Axial and central forces act to apply torque to the screw, while external forces, such as friction, exert a bending moment. The torsional moments are reflected in the torque, and this causes the screw to rotate at a higher rate than necessary. To ensure the longevity of the screw, the material of the screw shaft should be able to handle the bending moment, while the diameter of the shaft should be small enough to avoid causing damage.
Screws are made from different metals, such as steel, brass, titanium, and bronze. Manufacturers often apply a top coating of chromium, brass, or zinc to improve corrosion resistance. Screws made of aluminum are not durable and are prone to rusting due to exposure to weather conditions. The majority of screw shafts are self-locking. They are suited for many applications, including threaded fasteners, C-clamps, and vises.
Screws that are fabricated with conical sections typically feature reduced open cross-sectional areas at the discharge point. This is a key design parameter of conical screw shafts. In fact, reductions of up to 72% are common across a variety of applications. If the screw is designed to have a hard-iron hanger bearing, it must be hardened. If the screw shaft is not hardened, it will require an additional lubricant.
Another consideration is the threads. Screw shafts are typically made of high-precision threads and ridges. These are manufactured on lathes and CNC machines. Different shapes require different materials. Materials for the screw shaft vary. There are many different sizes and shapes available, and each one has its own application. In addition to helical and conical screw shafts, different materials are also available. When choosing material, the best one depends on the application.
The life of the screw depends on its size, load, and design. In general, the material of the screw shaft, nut body, and balls and rollers determine its fatigue life. This affects the overall life of the screw. To determine whether a specific screw has a longer or shorter life, the manufacturer must consider these factors, as well as the application requirements. The material should be clean and free of imperfections. It should be smooth and free of cracks or flaking, which may result in premature failure.

Function

The function of a screw shaft is to facilitate the rotation of a screw. Screws have several thread forms, including single-start, double-start and multi-start. Each form has its own advantages and disadvantages. In this article we’ll explore each of them in detail. The function of a screw shaft can vary based on its design, but the following are common types. Here are some examples of screw shaft types and their purposes.
The screw’s torque enables it to lift objects. It can be used in conjunction with a bolt and nut to lift a load. Screws are also used to secure objects together. You can use them in screw presses, vises, and screw jacks. But their primary function is to hold objects together. Listed below are some of their main functions. When used to lift heavy loads, they can provide the required force to secure an object.
Screws can be classified into two types: square and round. Square threads are more efficient than round ones because they apply 0deg of angle to the nut. Square threads are also stronger than round threads and are often used in high-load applications. They’re generally cheaper to manufacture and are more difficult to break. And unlike square threads, which have a 0deg thread angle, these threads can’t be broken easily with a screwdriver.
A screw’s head is made of a series of spiral-like structures that extend from a cylindrical part to a tip. This portion of the screw is called the shank and is made of the smallest area. The shank is the portion that applies more force to the object. As the shaft extends from the head, it becomes thinner and narrow, forming a pointed tip. The head is the most important part of the screw, so it needs to be strong to perform its function.
The diameter of the screw shaft is measured in millimeters. The M8 screw has a thread pitch of 1.25 mm. Generally, the size of the screw shaft is indicated by the major and minor diameter. These dimensions are appended with a multiplication sign (M8x1).
screwshaft

Applications

The design of screws, including their size and shape, determines their critical rotating speeds. These speeds depend on the threaded part of the screw, the helix angle, and the geometry of the contact surfaces. When applied to a screw, these limits are referred to as “permissible speed limits.” These maximum speeds are meant for short periods of time and optimized running conditions. Continuous operation at these speeds can reduce the calculated life of a nut mechanism.
The main materials used to manufacture screws and screw shafts include steel, stainless steel, titanium, bronze, and brass. Screws may be coated for corrosion resistance, or they may be made of aluminium. Some materials can be threaded, including Teflon and nylon. Screw threads can even be molded into glass or porcelain. For the most part, steel and stainless steel are the most common materials for screw shafts. Depending on the purpose, a screw will be made of a material that is suitable for the application.
In addition to being used in fasteners, screw shafts are used in micrometers, drillers, conveyor belts, and helicopter blades. There are numerous applications of screw shafts, from weighing scales to measuring lengths. If you’re in the market for a screw, make sure to check out these applications. You’ll be happy you did! They can help you get the job done faster. So, don’t delay your next project.
If you’re interested in learning about screw sizing, then it’s important to know the axial and moment loads that your screws will experience. By following the laws of mechanics and knowing the load you can calculate the nominal life of your screw. You can also consider the effect of misalignment, uneven loading, and shocks on your screw. These will all affect the life of your screw. Then, you can select the right screw.

China 270Hp 200Kw 7Bar 34.5m3min Water Cooling Industrial Screw Air Compressor for Filter Press     wheel and axleChina 270Hp 200Kw 7Bar 34.5m3min Water Cooling Industrial Screw Air Compressor for Filter Press     wheel and axle
editor by czh 2023-03-09

Find us

Ep Screw Jack Co., Ltd.

Mail: [email protected]

As one of leading manufacturers, suppliers and exporters of mechanical products in China, We offer reducers, sprockets, industrial and conveyor chain, belts, pulleys, gears, racks, gearboxes, motors, PTO Shafts, taper lock Bushing, vacuum Pumps, screw air compressors and many other products. Please contact us for details.

Recent Posts