Product features
One strand sprocket with 1 set of teeth around the circumference for applications where a single chain may support the torque and load
Pitch of 3/4 inch for size 60 chains
Sprocket bore and hub with QD fittings for inserting and locking bushings into place
Type B sprocket with a hub projection on one part to accommodate numerous kinds of bushings to greatly help prevent sprocket from slipping on the shaft
Sprocket teeth assist in preventing slipping and binding in order to avoid power loss in assemblies
Product description
This Tsubaki roller chain sprocket includes a 3/4-inch pitch, fits size 60 chains, and is single strand with one group of teeth around its circumference for use with single strand chains. It really is a sort B sprocket with a hub projection encircling the bore on one side, and both the hub and bore possess Quick-Disconnect (QD) fittings for inserting and locking into place different QD bushings based on the diameter of the shaft. One’s teeth of the sprocket help prevent slipping and binding in order to avoid power loss in assemblies. It meets International Organization for Standardization (ISO) 9001 for quality assurance. This one strand roller chain sprocket is certainly suitable for use in a broad range of applications involving light to moderate loads and ongoing, high-cycle operations, including automobile transmission systems, building and agricultural tools, conveyors, and factory production and assembly lines, amongst others.
A roller chain sprocket is a thin wheel with deep, uniformly spaced tooth ringing its circumference. The length from the peak of 1 tooth to the next is named the pitch, and is often measured in 1/8-” increments. The sprocket transfers power and movement by a roller chain that’s threaded over one’s teeth of the sprocket. The alignment of the chain with the sprocket’s pitch prevents the chain from slipping to ensure that no power is lost. In the center of the sprocket may be the bore (hole) for sliding the sprocket onto a shaft, and a bushing or bearing is definitely often suited to the sprocket’s hub to custom-suit the sprocket onto a shaft to carry it firmly set up. A hub is a protruding, elevated lip encircling the bore of the sprocket. Sprockets with hubs on both sides are Type C, sprockets with hubs using one part are Type B, and sprockets with no hubs are Type A sprockets. For applications needing sprockets to be swapped onto shafts 
of different diameters, a sprocket with a bore large enough to match all shafts can be used, with the gap between your bore and shaft closed with a bushing or bearing. Roller chain sprockets are used in a broad selection of applications where in fact the drive power of an engine must be transferred into movement, such as in automobiles, conveyors, escalators, agricultural, forestry and mining apparatus, aeronautics, robotics and space exploration, amongst others.
U.S. Tsubaki Power Transmission manufactures a number of chains, sprockets, and other power transmission components that meet International Business for Standardization (ISO) requirements for quality assurance. The business, founded in 1917, can be headquartered in Wheeling, IL.