pto gearbox
2) Loosen the bolts only when fitting the shafts. DO NOT eliminate the bolts entirely. If eliminated they might drop into the housing and lead to a failure. The box should be disassembled to retrieve the bolts if this transpires.
one) Tighten bolts to avoid oil leaking during procedure. (The bolts have a seal underneath their heads.)
Get care when tightening the 4 x locking bolts within the housing. These bolts resolve the removable splined shafts in location.
Note: When fitting splined shafts.
Simply click on drawing to enlarge.
1:one.85 velocity increaser with 13/four”Z20 splined output shaft.
To find out more about pto gearbox see https://www.ever-power.net/product/hydraulic-pto-drive-gearbox-spped-increaser/.