“H” CLASS Refuse Drag Chains is utilized for conveying Stainless Steel Chain sawdust,wooden chips, pulp, garbage, tankage, ashes, and other abrasive spend through either wooden or steel troughs. Due to the large, wide opening region, “H” CLASS Refuse Drag Chain provides sizeable carrying capacity when operated at moderate speeds.
The front face of each barrel is flat, providing a wide area to push material along the trough and also to keep the chaim from riding over the top of the material. The rounded inner aspect of the barrel can be carefully shaped to make excellent sprocket contact. Sidebars are reinforced with putting on sneakers which provide both
additional wearing surface and stiffening for the hyperlink. A vertical member on each sidebar assures added link rigidity and defends the pin from harm.
“H”CLASS Refuse Drag Chain comes in EVRT-POWER Promal or Duramal with a tensile power selection of 36,400 to 52,000 pounds. This durable working chain comes in a pitch selection of 5.000 to 8.000 inches. Each link is stated in accordance with manufacturer’s specifications and may be interchanged with links created by various other chain producers. “H”CLASS Refuse Drag Chain is available in riveted construction just. Grease chambers, cored into each link’s barrel, 
hold grease which lubricates pins.
Wide faced sprockets, either of machined or cast steel, are recommended for”H” course Refuse Drag Chain procedure. Links should always be operate in direction of the closed barrel.
“H” CLASS Refuse Drag Chains (H102/H104/H110/H112/H116/H120/H480)
Tags: