The EP Greenhouse Gearbox is a concise and lightweight reduction gearbox with a built-in limit switch system that is ideal for assembly of a locally available electric electric motor. The Gearbox is utilized in manually-managed or climate-controlled ventilation and display screen systems in greenhouses. The quick and easy-to-installEP Gearbox is usually rainproof and windproof. The Gearbox includes a high protection class (IP65) and can be used in an ambient temperature of 0-60 °C.
The low-noise Gearbox for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminium precision housing. The self-braking worm wheel transmitting ensures that the drive shaft can be locked when the decrease gearbox isn’t running. The completely sealed reduction gearbox has an growth chamber with a diaphragm to keep carefully the gear essential oil at a minimal pressure under all conditions, even at high temperatures. Thanks to the use of an growth chamber, the Gearbox can be installed in any placement. There are no limitations, because there is no dependence on a bleed connect. The sealed reduction gearbox keeps the gear oil of the Gearbox in ideal 
condition because of its entire operating lifetime. The Gearbox is suitable for discontinuous use, working course s3-30%, with a maximum activation time of 25 minutes.
The Gear box reduction gearbox comes with an FT85 motor assembly flange, on to which a suitable IEC standard motor can simply be installed (EN 50347).
The Gear box includes a rotating limit switch system with operating switches and circuit Gear motors for Greenhouse breakers (NC contacts) for turning off at the end positions. The limit change system is installed within an built-in chamber and is usually enclosed by an impact-resistant plastic-type material cover. The limit change system is accessible and simple to adjust. The limit change system’s optimum switching range is definitely 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The Gearbox has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The Gearbox for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.
Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of application of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperatures of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, optimum activation time 25 mins.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC regular motor (EN 50347).
Maximum switching selection of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).