Product Description
Main Gearbox Parts:Transmission Front Housing & Control System, Transimission Housing -Middle, Lay Shaft, Main Shaft, Idle Wheel, Sub Gearbox 1, Sub Gearbox 2, Import Shaft and Cover, Small Cover, Fork Shaft(HW19710), (HW19710)/Pump and Pipe(HW19710), Air Pipeand.
Product Description
Â
|
PART(S) NUMBER |
Part Name |
|
AZ |
Main Shaft Ass. |
|
AZ |
Lay Shaft-left |
|
AZ |
Lay Shaft-right |
|
AZ |
Small Cover Ass. |
|
WG |
Synchronizer Ring |
|
WG |
Double H Valve |
|
WG220325571 |
Pneumatic Control Valve |
|
WG |
Pressure Switch |
|
Q2881016F9 |
Set Screw |
|
WG |
Clutch Release Fork |
|
AZ |
Transmission Front Housing |
|
AZ225711005 |
Transmission Middle Housing |
|
AZ |
Lay Shaft Forth Gear |
|
WG |
Idler Shaft |
|
AZ225710040 |
Range Gear Subbox Ass. |
|
WG |
Planetary Rack |
|
AZ |
Output Shaft |
|
WG |
Fork Pendulum Block |
|
WG |
Range Block Cylinder |
|
WG225710009 |
Odometer Connector Ass. |
|
AZ |
Transmission Back Housing |
|
WG |
Synchronous Push Block |
|
WG |
Planetary Wheel |
|
WG |
Input Shaft End Cap |
|
WG |
Support Rod Ass. |
|
WG |
Sensor Drive Ring |
|
AZ |
Shift Head |
|
WG |
Gear Selection Support Shaft |
|
WG |
Oil Pump Ass. |
|
Female Screw |
Â
Â
Sincere to customer and in good faith of quality is our forever followed motto. It’s the basement to be a human and on business. We take all responsibility for our products and service sincerely.
Â
Â
Â
Â
Company brief introduction:
We are established in 2571. The company is located in HangZhou City, ZheJiang Province, where CZPT is located.Sincere to the customer and in good faith of quality is Deruna Heavy Truck Parts forever followed motto. It’s the basement to be a human and do business. We take all responsibility for our products and service sincerely.
Main product:
Our company specializing in the manufacturing and wholesale of China National Heavy Duty Truck, ZheJiang Heavy Duty Truck, Beiben truck, CZPT truck and its related accessories. We mainly engage in various accessories products such as truck parts, cylinder blocks, crankshafts, diesel engines.
1.Power parts, including engines and peripheral parts [such as starters, generators, superchargers, various filter elements, etc.
2. Driving Part [also called transmission part], including clutch, gearbox, transmission shaft, axle, etc.;
3. Suspension part, including front and rear steel plates and fasteners, balance shaft, thrust rod, etc.
4. Steering part, including steering gear and Horizontal pull rods, etc.
5. Electrical appliances and valve parts, including various types of electrical switches, wiring harnesses, bulbs, and various braking components (valves).
6. Control and cargo parts, namely cab and cargo compartment.
7. Frame [that is, the beam] and so on.
Overseas market at present:
Our sales have averaged over 10 years of experience in exporting, and are proficient in all processes of business operation which can efficiently fulfill customer needs.
We currently export to 37 countries, and the client partners from Russia, New Zealand, Fiji, Papua New Guinea, Malaysia, Zambia, South Sudan, United Arab Emirates, Zimbabwe, Colombia and so on. We can also help you to supply registration documents of the importing in different countries. Welcome new and regular customers to contact us to establish future business relationships and achieve common success!
Q: What if I can not provide part number for reference?A: If no part number, we can judge and quote the requested parts by engine name-plate or photos; It would be great if you could provide us with the chassis number(VIN) so that we can provide a more comprehensive analysis and accurate quote feedback based on your truck model.
Q: Can we buy 1 pcs of truck parts for quality testing?A: Yes, we are glad to send 1pcs item for quality testing if we have the truck parts of you need in stock.
Q: Do you test all your goods before delivery?A: Yes, we have 100% test before delivery.
Q: How do you make our business long-term and good relationship?A: We keep good quality and competitive price to ensure our customers benefit; We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Q: How long is the production time of the goods?A: We have sufficient stock of regular specifications for immediate delivery; Non-conventional specifications generally require stocking for about 7-10 days; Large quantities order need to be in stock for about 15-20 days.
Q: What is the packing?A: Neutral packing of paper carton or wooden case. Or we customize the packaging according to your requirements
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Car, Truck |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Optional |
| Step: | Optional |
| Samples: |
US$ 1/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How do screw jacks contribute to the safety of tasks like vehicle maintenance?
Screw jacks play a crucial role in ensuring the safety of tasks like vehicle maintenance. They provide stability, lifting capabilities, and precise control, which are essential for safe and efficient maintenance operations. Here’s how screw jacks contribute to safety in vehicle maintenance:
- Stability and Load Capacity: Screw jacks are designed to provide high stability and support heavy loads. When used in vehicle maintenance, they offer a solid and secure platform for lifting and supporting the vehicle. This stability ensures that the vehicle remains steady during maintenance tasks, reducing the risk of accidents or injuries caused by uncontrolled movement or instability.
- Precise Height Adjustment: Screw jacks allow for precise height adjustment, enabling mechanics to position the vehicle at the desired working height. This precise control ensures that the vehicle is at an optimal height for accessing various components, performing inspections, or conducting repairs. It helps maintain a comfortable working posture for mechanics, minimizing the risk of strain or injury.
- Locking Mechanisms: Screw jacks often incorporate locking mechanisms to securely hold the lifted load in position. These locking mechanisms prevent accidental lowering of the vehicle during maintenance tasks, providing an additional layer of safety. Even in the event of power loss or system failure, the locking mechanism ensures that the vehicle remains elevated, reducing the risk of injury or damage.
- Even Weight Distribution: When multiple screw jacks are used in a synchronized system, they distribute the load evenly, ensuring balanced support. This even weight distribution minimizes stress on individual components and prevents overloading, reducing the risk of equipment failure or accidents caused by imbalanced loads.
- Integration with Safety Systems: Screw jacks can be integrated with safety systems to enhance overall safety during vehicle maintenance tasks. For example, limit switches or proximity sensors can be used to prevent the screw jacks from exceeding their maximum or minimum height limits. Emergency stop buttons or safety interlocks can be integrated into the control system, allowing immediate halting of the lifting operation in case of emergencies or hazardous situations.
The combination of stability, precise control, locking mechanisms, even weight distribution, and integration with safety systems makes screw jacks a reliable and safe solution for vehicle maintenance tasks. They provide mechanics with a secure working platform, reduce the risk of accidents, and contribute to the overall safety and efficiency of vehicle maintenance operations.
How do screw jacks enhance the efficiency of tasks like machinery assembly?
Screw jacks play a significant role in enhancing the efficiency of tasks like machinery assembly. They offer several advantages that contribute to smoother and more efficient assembly processes. Here are some ways in which screw jacks enhance efficiency:
- Precise Positioning: Screw jacks provide precise and controlled positioning, allowing for accurate alignment and assembly of machine components. The threaded screw mechanism enables incremental adjustments, enabling precise positioning and alignment during the assembly process. This precision helps ensure that components fit together correctly, reducing the need for rework or adjustments after assembly.
- Flexible Lifting and Lowering: Screw jacks allow for controlled lifting and lowering of heavy machine components during assembly. By adjusting the screw jack’s height, operators can position the components at the desired elevation, making it easier to align and attach them. The ability to fine-tune the lifting and lowering process enhances efficiency by reducing manual effort and simplifying the assembly tasks.
- Load Distribution: Screw jacks distribute the load evenly across multiple jacks or support points, providing stability during machinery assembly. This load distribution helps prevent excessive stress on individual components and ensures that the weight is properly supported. By maintaining stability and load distribution, screw jacks contribute to efficient and safe assembly processes.
- Height Adjustment: Screw jacks allow for height adjustment of machinery during assembly, enabling operators to align components at the optimal working height. This adjustability is particularly beneficial when assembling large or complex machinery, as it provides ergonomic advantages for the operators. Working at the correct height reduces fatigue and improves productivity, ultimately enhancing the efficiency of the assembly process.
- Modularity and Versatility: Screw jacks are often designed with modularity in mind, allowing them to be easily integrated into various assembly setups. They can be combined with other components such as mounting plates, couplings, or motorized systems to create customized assembly solutions. This modularity and versatility enable efficient adaptation to different assembly requirements and facilitate the integration of screw jacks into existing assembly processes.
- Automation Integration: Screw jacks can be integrated into automated assembly systems, improving efficiency by reducing manual labor and increasing the speed of assembly processes. With appropriate motorization and control systems, screw jacks can be synchronized and operated in conjunction with other automated machinery, streamlining the assembly workflow and reducing cycle times.
By providing precise positioning, flexible lifting and lowering, load distribution, height adjustment, modularity, versatility, and automation integration, screw jacks significantly enhance the efficiency of tasks like machinery assembly. They contribute to smoother operations, improved productivity, and better overall assembly quality.
Can screw jacks be adapted for both vertical and horizontal lifting applications?
Yes, screw jacks can be adapted for both vertical and horizontal lifting applications. Screw jacks are versatile mechanical devices that can be configured and mounted in various orientations to accommodate different lifting requirements. Here’s how screw jacks can be adapted for vertical and horizontal lifting applications:
- Vertical Lifting: Screw jacks are commonly used for vertical lifting applications. In vertical lifting configurations, the screw jack is mounted in a vertical position, with the load being lifted or lowered along the vertical axis. Vertical lifting applications include lifting platforms, stage equipment, heavy machinery, and other scenarios where vertical movement is required. Screw jacks designed for vertical lifting typically feature self-locking mechanisms to ensure load stability when the screw is not being rotated. The load is supported by the screw jack’s structure, which is constructed to handle the vertical forces exerted during lifting.
- Horizontal Lifting: Screw jacks can also be adapted for horizontal lifting applications. In horizontal lifting configurations, the screw jack is mounted in a horizontal position, and the load is moved horizontally or at an angle. Horizontal lifting applications can include conveyor systems, sliding gates, adjustable workstations, and other scenarios where linear movement is required along a horizontal plane. To adapt a screw jack for horizontal lifting, additional support mechanisms may be employed to counteract the gravitational forces acting on the load. These support mechanisms can include guide rails, linear guides, or additional bracing to maintain stability and control during horizontal movement.
- Angular Lifting: Screw jacks can be further adapted for angular lifting applications where the load needs to be lifted or lowered along an inclined or diagonal plane. Angular lifting configurations require careful consideration of the load’s weight distribution, the angle of inclination, and the stability of the supporting structure. By appropriately positioning and supporting the screw jack, angular lifting applications can be achieved with precision and control.
- Mounting Flexibility: Screw jacks offer flexibility in terms of mounting options, allowing them to be adapted for various orientations. The mounting flexibility enables screw jacks to be integrated into different lifting systems and structures. Depending on the specific requirements of the application, screw jacks can be mounted using flanges, brackets, or other mounting accessories. This adaptability facilitates the use of screw jacks in both vertical and horizontal lifting applications.
In summary, screw jacks can be adapted for both vertical and horizontal lifting applications. By considering factors such as load requirements, gravitational forces, stability needs, and mounting flexibility, screw jacks can be configured and mounted to provide stable and controlled lifting in various orientations.
editor by CX 2023-12-23