Product Description
Main Gearbox Parts:Transmission Front Housing & Control System, Transimission Housing -Middle, Lay Shaft, Main Shaft, Idle Wheel, Sub Gearbox 1, Sub Gearbox 2, Import Shaft and Cover, Small Cover, Fork Shaft(HW19710), (HW19710)/Pump and Pipe(HW19710), Air Pipeand.
Â
|
PART(S) NUMBER |
Part Name |
|
AZ |
Main Shaft Ass. |
|
AZ |
Lay Shaft-left |
|
AZ |
Lay Shaft-right |
|
AZ |
Small Cover Ass. |
|
WG |
Synchronizer Ring |
|
WG |
Double H Valve |
|
WG220325571 |
Pneumatic Control Valve |
|
WG |
Pressure Switch |
|
Q2881016F9 |
Set Screw |
|
WG |
Clutch Release Fork |
|
AZ |
Transmission Front Housing |
|
AZ225711005 |
Transmission Middle Housing |
|
AZ |
Lay Shaft Forth Gear |
|
WG |
Idler Shaft |
|
AZ225710040 |
Range Gear Subbox Ass. |
|
WG |
Planetary Rack |
|
AZ |
Output Shaft |
|
WG |
Fork Pendulum Block |
|
WG |
Range Block Cylinder |
|
WG225710009 |
Odometer Connector Ass. |
|
AZ |
Transmission Back Housing |
|
WG |
Synchronous Push Block |
|
WG |
Planetary Wheel |
|
WG |
Input Shaft End Cap |
|
WG |
Support Rod Ass. |
|
WG |
Sensor Drive Ring |
|
AZ |
Shift Head |
|
WG |
Gear Selection Support Shaft |
|
WG |
Oil Pump Ass. |
|
Female Screw |
Â
Â
Sincere to customer and in good faith of quality is our forever followed motto. It’s the basement to be a human and on business. We take all responsibility for our products and service sincerely.
Â
Â
Â
Â
Company brief introduction:
We are established in 2571. The company is located in HangZhou City, ZheJiang Province, where CZPT is located.Sincere to the customer and in good faith of quality is Deruna Heavy Truck Parts forever followed motto. It’s the basement to be a human and do business. We take all responsibility for our products and service sincerely.
Main product:
Our company specializing in the manufacturing and wholesale of China National Heavy Duty Truck, ZheJiang Heavy Duty Truck, Beiben truck, CZPT truck and its related accessories. We mainly engage in various accessories products such as truck parts, cylinder blocks, crankshafts, diesel engines.
1.Power parts, including engines and peripheral parts [such as starters, generators, superchargers, various filter elements, etc.
2. Driving Part [also called transmission part], including clutch, gearbox, transmission shaft, axle, etc.;
3. Suspension part, including front and rear steel plates and fasteners, balance shaft, thrust rod, etc.
4. Steering part, including steering gear and Horizontal pull rods, etc.
5. Electrical appliances and valve parts, including various types of electrical switches, wiring harnesses, bulbs, and various braking components (valves).
6. Control and cargo parts, namely cab and cargo compartment.
7. Frame [that is, the beam] and so on.
Overseas market at present:
Our sales have averaged over 10 years of experience in exporting, and are proficient in all processes of business operation which can efficiently fulfill customer needs.
We currently export to 37 countries, and the client partners from Russia, New Zealand, Fiji, Papua New Guinea, Malaysia, Zambia, South Sudan, United Arab Emirates, Zimbabwe, Colombia and so on. We can also help you to supply registration documents of the importing in different countries. Welcome new and regular customers to contact us to establish future business relationships and achieve common success!
Q: What if I can not provide part number for reference?A: If no part number, we can judge and quote the requested parts by engine name-plate or photos; It would be great if you could provide us with the chassis number(VIN) so that we can provide a more comprehensive analysis and accurate quote feedback based on your truck model.
Q: Can we buy 1 pcs of truck parts for quality testing?A: Yes, we are glad to send 1pcs item for quality testing if we have the truck parts of you need in stock.
Q: Do you test all your goods before delivery?A: Yes, we have 100% test before delivery.
Q: How do you make our business long-term and good relationship?A: We keep good quality and competitive price to ensure our customers benefit; We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Q: How long is the production time of the goods?A: We have sufficient stock of regular specifications for immediate delivery; Non-conventional specifications generally require stocking for about 7-10 days; Large quantities order need to be in stock for about 15-20 days.
Q: What is the packing?A: Neutral packing of paper carton or wooden case. Or we customize the packaging according to your requirements
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Car, Truck |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Optional |
| Step: | Optional |
| Samples: |
US$ 1/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What advancements in screw jack technology have improved efficiency and reliability?
Advancements in screw jack technology have led to significant improvements in efficiency and reliability. Here are some key advancements that have contributed to these improvements:
- High-Efficiency Ball Screws: Traditional screw jacks often used trapezoidal or square threads, which had relatively lower efficiency due to higher friction. However, the introduction of high-efficiency ball screws in screw jack designs has greatly improved efficiency. Ball screws offer low friction and higher efficiency, resulting in reduced power consumption and improved overall system efficiency.
- Improved Lubrication Systems: Proper lubrication is crucial for the smooth operation and longevity of screw jacks. Advancements in lubrication systems, such as the use of self-lubricating materials, improved lubricants, and better sealing mechanisms, have enhanced the reliability and maintenance intervals of screw jacks. These advancements minimize wear, reduce friction, and ensure consistent performance over extended periods.
- Materials and Coatings: The use of advanced materials and coatings has significantly improved the durability and reliability of screw jacks. Components made from high-strength alloys, such as stainless steel or hardened steel, can withstand higher loads and resist wear. Additionally, coatings like zinc plating or epoxy coatings provide corrosion resistance, extending the lifespan of screw jacks in challenging environments.
- Integrated Sensors and Feedback Systems: Integration of sensors and feedback systems in screw jacks has improved their reliability and control. Position sensors, load sensors, and torque sensors can be integrated into screw jacks to provide real-time feedback and monitoring. This enables precise positioning, load measurement, and the ability to detect and respond to abnormal operating conditions, ensuring safe and reliable operation.
- Automation and Control Integration: The integration of screw jacks with advanced automation and control systems has improved efficiency and reliability. Motorized screw jacks can be integrated with programmable logic controllers (PLCs) or computer numerical control (CNC) systems, enabling precise and synchronized movements, remote operation, and automation. This integration minimizes human error, enhances repeatability, and optimizes the overall efficiency of screw jack systems.
- Design Optimization: Advancements in computer-aided design (CAD) and simulation tools have allowed for the optimization of screw jack designs. Finite element analysis (FEA) and virtual prototyping enable the evaluation and refinement of various design parameters, resulting in improved load-bearing capabilities, reduced weight, and enhanced structural integrity. These design optimizations contribute to increased efficiency and reliability.
These advancements in screw jack technology have collectively improved efficiency, reliability, and overall performance. Manufacturers continue to innovate and refine screw jack designs to meet the evolving needs of various industries, ensuring that screw jacks remain a reliable and efficient solution for lifting and adjusting loads.
Are there different types of screw jacks available for various load capacities?
Yes, there are different types of screw jacks available to accommodate various load capacities. Screw jacks are designed in different configurations and sizes to provide optimal performance and lifting capabilities for a wide range of loads. The load capacity of a screw jack depends on several factors, including the mechanical design, materials used, and the specific application requirements. Here are some common types of screw jacks based on load capacities:
- Miniature Screw Jacks: Miniature screw jacks are compact and lightweight, designed to handle relatively low loads. These screw jacks are commonly used in applications where precise positioning or small load adjustments are required. Miniature screw jacks find applications in industries such as electronics, optics, and small-scale automation systems.
- Standard Duty Screw Jacks: Standard duty screw jacks are versatile and widely used in various industrial applications. They are designed to handle moderate to high loads. These screw jacks offer a balance between load capacity and compactness, making them suitable for a wide range of lifting and positioning tasks in industries such as manufacturing, construction, and material handling.
- Heavy Duty Screw Jacks: Heavy-duty screw jacks are specifically engineered to handle large and heavy loads. These screw jacks are characterized by their robust construction, high load capacities, and enhanced durability. Heavy-duty screw jacks are utilized in applications that involve heavy machinery, industrial presses, large-scale manufacturing, and other scenarios requiring substantial lifting forces.
- Stainless Steel Screw Jacks: Stainless steel screw jacks are designed for applications where corrosion resistance and hygiene are crucial. These screw jacks are constructed using stainless steel components that offer excellent resistance to rust, chemicals, and environmental factors. Stainless steel screw jacks find applications in food processing, pharmaceuticals, clean rooms, and other industries with stringent cleanliness requirements.
- Customized Screw Jacks: In addition to standard types, manufacturers also offer customized screw jacks tailored to specific load capacities and application requirements. Customized screw jacks can be engineered to handle extremely high loads or designed for unique lifting scenarios where off-the-shelf solutions may not be suitable. These customized screw jacks are often developed in collaboration with the customer to ensure optimal performance and reliability.
The availability of different types of screw jacks allows users to select the appropriate solution based on their specific load capacities and application needs. By offering a range of load capacities, manufacturers ensure that there is a suitable screw jack available for a wide variety of lifting and positioning tasks across various industries.
Can screw jacks be customized for specific tasks like stage or platform adjustments?
Yes, screw jacks can be customized for specific tasks such as stage or platform adjustments. Customization allows screw jacks to meet the unique requirements of different applications, providing precise and reliable positioning and lifting solutions. Here’s how screw jacks can be customized for specific tasks:
- Load Capacity: Screw jacks can be customized to handle various load capacities. The load capacity of a screw jack is determined by factors such as the size and strength of the screw and the material used in its construction. By selecting the appropriate components and dimensions, screw jacks can be tailored to support the specific weight requirements of stages, platforms, or other equipment.
- Stroke Length: The stroke length of a screw jack refers to the distance it can extend or retract. By adjusting the length of the screw, the stroke length can be customized to accommodate the desired range of movement for stage or platform adjustments. This ensures that the screw jack can achieve the required height or position adjustments accurately.
- Speed: Depending on the application, the speed of stage or platform adjustments may be a critical factor. Screw jacks can be customized to provide different operating speeds by selecting the appropriate gear ratio or motor speed. This customization allows for efficient and precise adjustments, whether they need to be fast or slow.
- Mounting Options: Screw jacks can be customized to offer various mounting options to suit specific applications. Different types of mounting brackets, flanges, or couplings can be provided to ensure easy integration with existing structures or equipment. Customized mounting options simplify the installation process and enhance the overall functionality of the stage or platform adjustment system.
- Control Mechanism: Screw jacks can be customized with different control mechanisms to suit specific requirements. Manual control options, such as handwheels or crank handles, can be provided for simpler applications. For more complex systems or automated processes, electric or hydraulic motor-driven options can be implemented. Customized control mechanisms enable convenient and efficient operation of the screw jacks.
- Environmental Considerations: Depending on the operating environment, screw jacks can be customized with appropriate materials, coatings, or seals to ensure durability and performance. For example, in corrosive or outdoor settings, stainless steel or protective coatings can be applied to prevent degradation. Customization for environmental considerations enhances the longevity and reliability of screw jacks in specific tasks like stage or platform adjustments.
By offering customizable load capacities, stroke lengths, speeds, mounting options, control mechanisms, and environmental considerations, screw jacks can be tailored to meet the specific requirements of stage or platform adjustments. Customization ensures precise and reliable performance, contributing to the smooth operation of stages, platforms, or other equipment in various applications.
editor by CX 2024-03-20