Product Description
You can kindly find the specification details below:
HangZhou Mastery Machinery Technology Co., LTD helps manufacturers and brands fulfill their machinery parts by precision manufacturing. High precision machinery products like the shaft, worm screw, bushing……Our products are used widely in electronic motors, the main shaft of the engine, the transmission shaft in the gearbox, couplers, printers, pumps, drones, and so on. They cater to different industries, including automotive, industrial, power tools, garden tools, healthcare, smart home, etc.
Mastery caters to the industrial industry by offering high-level Cardan shafts, pump shafts, and a bushing that come in different sizes ranging from diameter 3mm-50mm. Our products are specifically formulated for transmissions, robots, gearboxes, industrial fans, and drones, etc.
Mastery factory currently has more than 100 main production equipment such as CNC lathe, CNC machining center, CAM Automatic Lathe, grinding machine, hobbing machine, etc. The production capacity can be up to 5-micron mechanical tolerance accuracy, automatic wiring machine processing range covering 3mm-50mm diameter bar.
Key Specifications:
| Name | Shaft/Motor Shaft/Drive Shaft/Gear Shaft/Pump Shaft/Worm Screw/Worm Gear/Bushing/Ring/Joint/Pin |
| Material | 40Cr/35C/GB45/70Cr/40CrMo |
| Process | Machining/Lathing/Milling/Drilling/Grinding/Polishing |
| Size | 2-400mm(Customized) |
| Diameter | φ12(Customized) |
| Diameter Tolerance | 0.015mm |
| Roundness | 0.003mm |
| Roughness | Ra0.4 |
| Straightness | 0.05mm |
| Hardness | Customized |
| Length | 128mm(Customized) |
| Heat Treatment | Customized |
| Surface treatment | Coating/Ni plating/Zn plating/QPQ/Carbonization/Quenching/Black Treatment/Steaming Treatment/Nitrocarburizing/Carbonitriding |
Quality Management:
- Raw Material Quality Control: Chemical Composition Analysis, Mechanical Performance Test, ROHS, and Mechanical Dimension Check
- Production Process Quality Control: Full-size inspection for the 1st part, Critical size process inspection, SPC process monitoring
- Lab ability: CMM, OGP, XRF, Roughness meter, Profiler, Automatic optical inspector
- Quality system: ISO9001, IATF 16949, ISO14001
- Eco-Friendly: ROHS, Reach.
Packaging and Shipping: Â
Throughout the entire process of our supply chain management, consistent on-time delivery is vital and very important for the success of our business.
Mastery utilizes several different shipping methods that are detailed below:
For Samples/Small Q’ty: By Express Services or Air Fright.
For Formal Order: By Sea or by air according to your requirement.
Â
Mastery Services:
- One-Stop solution from idea to product/ODM&OEM acceptable
- Individual research and sourcing/purchasing tasks
- Individual supplier management/development, on-site quality check projects
- Muti-varieties/small batch/customization/trial order are acceptable
- Flexibility on quantity/Quick samples
- Forecast and raw material preparation in advance are negotiable
- Quick quotes and quick responses
General Parameters:
If you are looking for a reliable machinery product partner, you can rely on Mastery. Work with us and let us help you grow your business using our customizable and affordable products.
| Material: | Carbon Steel |
|---|---|
| Load: | Drive Shaft |
| Stiffness & Flexibility: | Stiffness / Rigid Axle |
| Journal Diameter Dimensional Accuracy: | IT6-IT9 |
| Axis Shape: | Straight Shaft |
| Shaft Shape: | Real Axis |
| Customization: |
Available
| Customized Request |
|---|
How do screw jacks handle challenges like load imbalance or uneven surfaces?
Screw jacks are designed to handle challenges such as load imbalance or uneven surfaces through various mechanisms and features. Here’s how screw jacks address these challenges:
- Load Imbalance: Screw jacks can handle load imbalance by distributing the load evenly across multiple screw jacks. In applications where there is a significant load imbalance, multiple screw jacks can be used in a synchronized system. The synchronization ensures that each screw jack shares the load proportionally, preventing excessive stress on any individual screw jack.
- Self-Locking: Screw jacks have a self-locking feature that allows them to hold their position without the need for continuous power or external braking mechanisms. This self-locking capability helps maintain stability and prevents the load from shifting even in the absence of power or during power loss.
- Anti-Backlash Mechanism: To handle challenges related to backlash or unwanted movement caused by load imbalance or vibration, some screw jacks are equipped with anti-backlash mechanisms. These mechanisms minimize or eliminate the clearance between the screw and the nut, reducing the potential for backlash and ensuring precise positioning and stability.
- Flexible Mounting Options: Screw jacks offer flexible mounting options, which allow for proper alignment and compensation on uneven surfaces. Mounting brackets or couplings can be used to adapt the screw jacks to different orientations or to compensate for variations in the mounting surface. This flexibility ensures that the screw jacks can be securely installed and adjusted to accommodate uneven surfaces.
- Guidance Systems: In some cases, screw jacks may incorporate guidance systems to improve stability and alignment. These guidance systems can include linear guides or rails that guide the movement of the screw, ensuring smooth and accurate operation even when dealing with load imbalance or uneven surfaces.
By employing these mechanisms and features, screw jacks can effectively handle challenges related to load imbalance or uneven surfaces. They provide stability, precise positioning, and the ability to distribute loads evenly, making them suitable for a wide range of applications even in demanding environments.
What are the common signs of wear or issues that might require screw jack maintenance?
Regular maintenance is important for ensuring the proper functioning and longevity of screw jacks. It helps identify and address potential issues before they escalate into more significant problems. Here are some common signs of wear or issues that might indicate the need for screw jack maintenance:
- Unusual Noise: If a screw jack starts producing unusual noises during operation, such as grinding, squeaking, or knocking sounds, it could indicate a problem. These noises may be a result of worn or damaged components, inadequate lubrication, misalignment, or other mechanical issues. Prompt maintenance is necessary to diagnose and resolve the source of the noise.
- Increased Friction: If the movement of the screw jack becomes more difficult or requires excessive force, it could indicate increased friction within the mechanism. This may be caused by insufficient lubrication, contaminated lubricant, or worn components. Addressing the friction issue through maintenance, including lubrication and inspection of components, is important to prevent further damage and ensure smooth operation.
- Excessive Play or Backlash: Excessive play or backlash refers to unwanted movement or looseness in the screw jack assembly. It can occur due to worn or damaged components, improper assembly, or misalignment. Excessive play can negatively impact the precision, stability, and load-bearing capacity of the screw jack. Maintenance should be conducted to identify the cause of the play and rectify it to restore proper functionality.
- Irregular Movement: If the screw jack exhibits irregular or jerky movement instead of smooth and consistent operation, it may indicate issues with the drive mechanism, misalignment, or worn parts. Irregular movement can affect the performance and accuracy of the screw jack, potentially leading to safety hazards or reduced efficiency. Maintenance is necessary to diagnose and address the underlying causes of irregular movement.
- Leakage or Seal Damage: Screw jacks equipped with hydraulic or lubricant-filled systems may experience leakage or seal damage over time. Leakage can result in a loss of lubrication or hydraulic fluid, leading to inadequate lubrication, reduced performance, or system failure. Regular inspection and maintenance of seals, gaskets, and fluid levels are necessary to identify and rectify any leaks or seal damage.
- Visible Wear or Damage: Physical inspection of the screw jack is essential to identify visible signs of wear or damage. This may include worn threads, cracked or damaged housing, bent or misaligned components, or signs of corrosion. Any visible wear or damage should be addressed through maintenance to prevent further deterioration and ensure safe and reliable operation.
Regular inspection and maintenance are crucial to detect and address these signs of wear or issues promptly. It is recommended to follow the manufacturer’s guidelines for maintenance intervals and procedures to ensure the optimal performance and longevity of screw jacks.
What are the key components that make up a typical screw jack mechanism?
A typical screw jack mechanism consists of several key components that work together to convert rotational motion into linear motion and handle heavy loads. Here are the key components that make up a typical screw jack mechanism:
- Screw: The screw is a threaded shaft that forms the primary component of the screw jack mechanism. It has helical grooves running along its length and is responsible for converting rotary motion into linear motion. The pitch of the screw determines the linear displacement achieved per revolution.
- Nut: The nut is a component that engages with the screw’s threads. It is typically a cylindrical or rectangular block with a threaded hole that matches the screw’s threads. The nut moves along the screw’s threads when the screw is rotated, resulting in linear displacement.
- Housing: The housing, also known as the body or casing, provides support and protection to the internal components of the screw jack mechanism. It encloses the screw and nut, preventing contaminants from entering and ensuring smooth operation.
- Base: The base is the foundation of the screw jack mechanism. It provides stability and support to the entire system, especially when heavy loads are involved. The base is typically designed to be mounted on a solid surface or integrated into a larger structure.
- Input Device: The input device is responsible for providing the rotational motion to the screw. It can be a manual handle, an electric motor, a hydraulic or pneumatic system, or any other mechanism that generates the required rotary motion.
- Load Platform: The load platform, also known as the lifting platform or load-bearing surface, is the component that supports and carries the load to be lifted or lowered. It is typically attached to the nut and moves vertically as the nut travels along the screw’s threads.
- Supporting Columns or Legs: In some screw jack mechanisms, supporting columns or legs are used to provide additional stability and structural support. These columns or legs are connected to the base and help distribute the load evenly.
- Locking Mechanism: Some screw jack mechanisms include a locking mechanism to secure the load in a fixed position once the desired height or displacement is achieved. This mechanism prevents unintended movement or slippage of the load.
- Optional Accessories: Depending on the specific application, screw jack mechanisms can be equipped with additional accessories such as limit switches, position sensors, motor controllers, lubrication systems, or protective covers to enhance safety, control, and performance.
In summary, a typical screw jack mechanism consists of components such as the screw, nut, housing, base, input device, load platform, supporting columns, locking mechanism, and optional accessories. These components work together to convert rotary motion into linear motion and provide the means to lift, lower, or position heavy loads with precision and control.
editor by CX 2023-12-10