China 30Hp 22KW 8bar Industrial Rotary Screw Air Compressor for Woodworking Machine screw shaft design

Applicable Industries: Manufacturing Plant, Printing Shops, Construction works , furniture, woodworking, plastic bag package
Showroom Location: Indonesia, Pakistan, Colombia, OWC Powder Metallurgy One Way Needle Roller Bearing OWC1019GXRZ OWC1019GXLZ OWC1019 Uzbekistan
Condition: New
Type: Screw
Configuration: Stationary
Power Source: AC POWER
Lubrication Style: Lubricated
Mute: Yes
Model Number: BD-22EPM/8
Voltage: 380V 50Hz 3phase
Dimension(L*W*H): 1250*800*1120mm
Weight: 450kg
Warranty: 1.5 years
Working Pressure: 7 bar, 8 bar, 6 bar
Air capacity: 3.8 m3/min
Machinery Test Report: Provided
Video outgoing-inspection: Provided
Marketing Type: Ordinary Product
Warranty of core components: 2 years
Core Components: Pump, Bearing, airend
Gas Type: Air
Startup mode: VFD startup
Driven mode: One shaft driven
Cooling mode: air cooling
Energy saving: Yes
Permanent magnet motor: Yes
OEM: available
After Warranty Service: Spare parts
After-sales Service Provided: Online support
Packaging Details: Plywood Case, export package
Port: HangZhou,any port of China

Variable Speed Driven industrial rotary screw air compressor with PM motor

Model: BD-22EPM/8
Motor power: 22KW/30Hp
380V/50Hz 3phase standard power supply
Working Pressure: 7bar, 8bar
Air capacity: 1.0~3.8 m3/min

Key Advantages:

  • The airend and the motor is One-shaft driven. So the driven efficiency is very high, T7 Cold-Drawn Triangular Tube PTO Shaft Spare Part Friction Clutch 2 Disk Friction and there is no need for the maintenance of coupling or belt or gearbox.
  • We use IP23 air cooled PM motor, or IP65 oil cooled PM motor. PM motor is with higher efficiency compared with the asyn. motor. And the frequency adjusting range is wider to 25% to 100%.
  • Smart operation and easier maintenance. There is intelligent PLC control panel with remote monitoring system, so that the user can check the working parameters by their mobile phone or computer, no need to go to the working site time to time. And users can receive the alarm in advance for the routine maintenance.
  • B&D compressor manufacturing factory has passed the ISO9001 and ISO 14000 certification. And many of B&D screw compressors have CE certification, patent technology certificate and also the energy efficiency certificate. We would also take action to meet other market regulation and standards of certification to help our customer to resell in their market or to use the compressor in their factory.

    Packaging & Shipping
    Our Services 1. Full set of customs clearing documents for customer to import the compressors and spare parts timely.
    2. Online training for the operation and maintenance of the compressors.
    3. Vedios of the compressor operation and maintenance
    4. Marketing documents and detailed introduction of advantages
    5. Max. 24hours feedback for any consultation of the products or after-sale service
    6. OEM/ODM available
    7. One station of compressed air supply chain in B& High Power 60V 1500W Brushless Dc Motor Mid-drive Motor Kit With Controller For Electric Tricycle D factory, we can supply compressor, air dryer, air filters, air tank and spare parts.

    Company Information B&D factory is located in ZheJiang Province. There are plenty of loading ports in HangZhou, HangZhou, HangZhou and Hongkong and etc. We are well-know in Chinese market for our IOT system in the compressor design. Customers are always our priority. We focuse on good service and good products. Welcome to visit our factory in Xihu (West Lake) Dis. Dist. HangZhou City, B17-99D Alternator Sealed Ball Bearing B17-99D-2RS ZheJiang Province. Contact us for a pickup in the Xihu (West Lake) Dis. Airport in HangZhou! It is only 40mins driving.

    Related Products LS series compressors
    https:// /product-detail/Hot-Selling-Vertical-Airend-Oil-Cooled_1600113582883.html?spm=a2747.manage.0.0.35ab71d2KJzhs1

    GS series oil free water lubricated compressors
    https:// /product-detail/Water-Lubricated-air-compressor-Oil-free_1600185712786.html?spm=a2747.manage.0.0.35ab71d2KJzhs1

    All-in-1 combined CZPT for laser cutting machinery with 16bar pressure
    https:// /product-detail/22KW-30HP-Combined-air-compressors-screw_1600185471197.html?spm=a2747.manage.0.0.35ab71d2KJzhs1

    Detailed Images
    Our customer

    Screw Sizes and Their Uses

    Screws have different sizes and features. This article will discuss screw sizes and their uses. There are two main types: right-handed and left-handed screw shafts. Each screw features a point that drills into the object. Flat tipped screws, on the other hand, need a pre-drilled hole. These screw sizes are determined by the major and minor diameters. To determine which size of screw you need, measure the diameter of the hole and the screw bolt’s thread depth.

    The major diameter of a screw shaft

    The major diameter of a screw shaft is the distance from the outer edge of the thread on one side to the tip of the other. The minor diameter is the inner smooth part of the screw shaft. The major diameter of a screw is typically between two and sixteen inches. A screw with a pointy tip has a smaller major diameter than one without. In addition, a screw with a larger major diameter will have a wider head and drive.
    The thread of a screw is usually characterized by its pitch and angle of engagement. The pitch is the angle formed by the helix of a thread, while the crest forms the surface of the thread corresponding to the major diameter of the screw. The pitch angle is the angle between the gear axis and the pitch surface. Screws without self-locking threads have multiple starts, or helical threads.
    The pitch is a crucial component of a screw’s threading system. Pitch is the distance from a given thread point to the corresponding point of the next thread on the same shaft. The pitch line is one element of pitch diameter. The pitch line, or lead, is a crucial dimension for the thread of a screw, as it controls the amount of thread that will advance during a single turn.

    The pitch diameter of a screw shaft

    When choosing the appropriate screw, it is important to know its pitch diameter and pitch line. The pitch line designates the distance between adjacent thread sides. The pitch diameter is also known as the mean area of the screw shaft. Both of these dimensions are important when choosing the correct screw. A screw with a pitch of 1/8 will have a mechanical advantage of 6.3. For more information, consult an application engineer at Roton.
    The pitch diameter of a screw shaft is measured as the distance between the crest and the root of the thread. Threads that are too long or too short will not fit together in an assembly. To measure pitch, use a measuring tool with a metric scale. If the pitch is too small, it will cause the screw to loosen or get stuck. Increasing the pitch will prevent this problem. As a result, screw diameter is critical.
    The pitch diameter of a screw shaft is measured from the crest of one thread to the corresponding point on the next thread. Measurement is made from one thread to another, which is then measured using the pitch. Alternatively, the pitch diameter can be approximated by averaging the major and minor diameters. In most cases, the pitch diameter of a screw shaft is equal to the difference between the two.

    The thread depth of a screw shaft

    Often referred to as the major diameter, the thread depth is the outermost diameter of the screw. To measure the thread depth of a screw, use a steel rule, micrometer, or caliper. In general, the first number in the thread designation indicates the major diameter of the thread. If a section of the screw is worn, the thread depth will be smaller, and vice versa. Therefore, it is good practice to measure the section of the screw that receives the least amount of use.
    In screw manufacturing, the thread depth is measured from the crest of the screw to the root. The pitch diameter is halfway between the major and minor diameters. The lead diameter represents the amount of linear distance traveled in one revolution. As the lead increases, the load capacity decreases. This measurement is primarily used in the construction of screws. However, it should not be used for precision machines. The thread depth of a screw shaft is essential for achieving accurate screw installation.
    To measure the thread depth of a screw shaft, the manufacturer must first determine how much material the thread is exposed to. If the thread is exposed to side loads, it can cause the nut to wedge. Because the nut will be side loaded, its thread flanks will contact the nut. The less clearance between the nut and the screw, the lower the clearance between the nut and the screw. However, if the thread is centralized, there is no risk of the nut wedgeing.

    The lead of a screw shaft

    Pitch and lead are two measurements of a screw’s linear distance per turn. They’re often used interchangeably, but their definitions are not the same. The difference between them lies in the axial distance between adjacent threads. For single-start screws, the pitch is equal to the lead, while the lead of a multi-start screw is greater than the pitch. This difference is often referred to as backlash.
    There are two ways to calculate the pitch and lead of a screw. For single-start screws, the lead and pitch are equal. Multiple-start screws, on the other hand, have multiple starts. The pitch of a multiple-start screw is the same as its lead, but with two or more threads running the length of the screw shaft. A square-thread screw is a better choice in applications requiring high load-bearing capacity and minimal friction losses.
    The PV curve defines the safe operating limits of lead screw assemblies. It describes the inverse relationship between contact surface pressure and sliding velocity. As the load increases, the lead screw assembly must slow down in order to prevent irreversible damage from frictional heat. Furthermore, a lead screw assembly with a polymer nut must reduce rpm as the load increases. The more speed, the lower the load capacity. But, the PV factor must be below the maximum allowed value of the material used to make the screw shaft.

    The thread angle of a screw shaft

    The angle between the axes of a thread and the helix of a thread is called the thread angle. A unified thread has a 60-degree angle in all directions. Screws can have either a tapped hole or a captive screw. The screw pitch is measured in millimeters (mm) and is usually equal to the screw major diameter. In most cases, the thread angle will be equal to 60-degrees.
    Screws with different angles have various degrees of thread. Originally, this was a problem because of the inconsistency in the threading. However, Sellers’s thread was easier to manufacture and was soon adopted as a standard throughout the United States. The United States government began to adopt this thread standard in the mid-1800s, and several influential corporations in the railroad industry endorsed it. The resulting standard is called the United States Standard thread, and it became part of the ASA’s Vol. 1 publication.
    There are two types of screw threads: coarse and fine. The latter is easier to tighten and achieves tension at lower torques. On the other hand, the coarse thread is deeper than the fine one, making it easier to apply torque to the screw. The thread angle of a screw shaft will vary from bolt to bolt, but they will both fit in the same screw. This makes it easier to select the correct screw.

    The tapped hole (or nut) into which the screw fits

    A screw can be re-threaded without having to replace it altogether. The process is different than that of a standard bolt, because it requires threading and tapping. The size of a screw is typically specified by its major and minor diameters, which is the inside distance between threads. The thread pitch, which is the distance between each thread, is also specified. Thread pitch is often expressed in threads per inch.
    Screws and bolts have different thread pitches. A coarse thread has fewer threads per inch and a longer distance between threads. It is therefore larger in diameter and longer than the material it is screwed into. A coarse thread is often designated with an “A” or “B” letter. The latter is generally used in smaller-scale metalworking applications. The class of threading is called a “threaded hole” and is designated by a letter.
    A tapped hole is often a complication. There is a wide range of variations between the sizes of threaded holes and nut threads, so the tapped hole is a critical dimension in many applications. However, even if you choose a threaded screw that meets the requisite tolerance, there may be a mismatch in the thread pitch. This can prevent the screw from freely rotating.

    China 30Hp 22KW 8bar Industrial Rotary Screw Air Compressor for Woodworking Machine     screw shaft designChina 30Hp 22KW 8bar Industrial Rotary Screw Air Compressor for Woodworking Machine     screw shaft design
    editor by czh 2023-03-11

    Find us

    Ep Screw Jack Co., Ltd.

    Mail: [email protected]

    As one of leading manufacturers, suppliers and exporters of mechanical products in China, We offer reducers, sprockets, industrial and conveyor chain, belts, pulleys, gears, racks, gearboxes, motors, PTO Shafts, taper lock Bushing, vacuum Pumps, screw air compressors and many other products. Please contact us for details.

    Recent Posts