900 CLASS SUGAR MILL CHAINS 901 902 907 5174

900 SERIES PINTLE CHAINS, sometimes known as “sugar mill” or “intermediate carrier chain” is utilized extensively in sugar mills. Multiple strands of 900 Pintle Chain, available with one or two holes per link, could be fitted with overlapping beaded carrier slats to create a continuing apron conveyor for intermediate carrier assistance.
The pin holes at the closed end of the 900 Class link are given with smooth bushings which are press-fitted in to the links and keyed into place. The bushings are renewable and will be driven out and replaced if they become worn. 900 Class Pintle Chain was created with dual barrels, one on each part of the open end of the links, to support double sprockets. The purpose of this driving method is to remove the possibility of material build-up in the sprocket get in touch with area, which often causes the chain to leap the sprocket. Heavy ribs rigidly reinforce these generating barrels.
Our 900 Course chain links, with tensile power from 22,500 to 32,500 pounds, can be found with large sliding areas to reduce chain wear and Transmission Drive Chain prolong chain lifestyle. Broad wearing surfaces and weighty cross sections team up to provide a considerable link which is manufactured according to manufacturer’s criteria and can perfectly replace links made by other manufacturers.
Brutaloy sprockets for 900 Class Pintle Chain are readily available in 3.170 inches. 900 Class Pintle Chain should only be permitted to travel in a single direction; links should always run in the direction of their shut narrow end.
Available in cottered construction just, 900 Class Chain is definitely assembled with T-headed pins which are locked into place by two lugs cast on the ends of the generating barrels to prevent pin rotation. Pin rotation during operation would result in wear on the inside of the bushing. Both mind of the pin and the cottered end of the pin are secured by cast lugs on the barrel end of the links.
900 Class Pintle Chain are links cast of malleable iron or Promal (Duramal). It is furnished with carbon metal temperature treated pins and carbon metal case hardened bushings as standard. However, stainless steel pins and bushings could be provided when specified.


Find us

Ep Screw Jack Co., Ltd.

Mail: [email protected]

As one of leading manufacturers, suppliers and exporters of mechanical products in China, We offer reducers, sprockets, industrial and conveyor chain, belts, pulleys, gears, racks, gearboxes, motors, PTO Shafts, taper lock Bushing, vacuum Pumps, screw air compressors and many other products. Please contact us for details.

Recent Posts