Product features
Single strand sprocket with 1 set of teeth around the circumference for applications in which a single chain can support the torque and load
Pitch of 3/4 inch for size 60 chains
Sprocket bore and hub with QD fittings for inserting and locking bushings into place
Type B sprocket with a hub projection using one aspect to accommodate numerous kinds of bushings to greatly help prevent sprocket from slipping on the shaft
Sprocket teeth assist in preventing slipping and binding to avoid power loss in assemblies
Product description
This Tsubaki roller chain sprocket includes a 3/4-inch pitch, fits size 60 chains, and is single strand with one group of teeth around its circumference for use with single strand chains. It really is a Type B sprocket with a hub projection encircling the bore using one side, and both hub and bore possess Quick-Disconnect (QD) fittings for inserting and locking into place different QD bushings depending on the diameter of the shaft. One’s teeth of the sprocket assist in preventing slipping and binding in order to avoid power reduction in assemblies. It meets International Corporation for Standardization (ISO) 9001 for quality assurance. This solitary strand roller chain sprocket is definitely ideal for use in a broad range of applications involving light to moderate loads and ongoing, high-cycle operations, including automobile transmission systems, construction and agricultural equipment, conveyors, and factory manufacturing and assembly lines, among others.
A roller chain sprocket is a thin wheel with deep, uniformly spaced tooth ringing its circumference. The distance from the peak of 1 tooth to the next is named the 
pitch, and is often measured in 1/8-inch increments. The sprocket transfers power and motion by a roller chain that’s threaded over the teeth of the sprocket. The alignment of the chain with the sprocket’s pitch helps prevent the chain from slipping to ensure that no power is certainly lost. In the center of the sprocket may be the bore (hole) for sliding the sprocket onto a shaft, and a bushing or bearing is usually often fitted to the sprocket’s hub to customized-suit the sprocket onto a shaft to carry it firmly in place. A hub is a protruding, raised lip encircling the bore of the sprocket. Sprockets with hubs on both sides are Type C, sprockets with hubs on one side are Type B, and sprockets without hubs are Type A sprockets. For applications requiring sprockets to become swapped onto shafts of different diameters, a sprocket with a bore large enough to match all shafts may be used, with the gap between the bore and shaft closed with a bushing or bearing. Roller chain sprockets are found in a broad selection of applications where in fact the drive power of an engine must be transferred into movement, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining tools, aeronautics, robotics and space exploration, among others.
U.S. Tsubaki Power Transmitting manufactures a number of chains, sprockets, and additional power transmission components that meet International Company for Standardization (ISO) criteria for quality assurance. The business, founded in 1917, is certainly headquartered in Wheeling, IL.