gear rack for Material Handling Industry

A machine builder required a vertical axis drive to pull, stack and transfer sections of pipe in an oil field environment. The application form load was very large and would have to be transported vertically over a long distance.

The client also asked to reduce the weight of the structure while keeping a higher level of safety.
Due to the high loading, ATLANTA offered a multi-drive solution, which shared the load over four pinions working on two lengths of rack. This allowed a smaller sized rack and pinion to be utilized, reducing the weight of the axis drives.

Since accuracy was not essential for the application form, an induction-hardened rack was used. This rack got induction-hardened teeth to provide high thrust capability. To insure that the racks remained stationary beneath the high loading, two meter long racks were utilized to maximize the amount of mounting screws utilized per section and dowel pins had been used to pin the racks set up.

The Ever-Power solution met all the requirements from the customer and was able to handle the high loading from the pipes being transported.
A milling cutter for a wooden functioning machine has pairs of base plates, each plate having a recess to received a slicing place. Each pair of basis plates is mounted on helpful information plate, and numerous such instruction plates are mounted on a common tubular shaft. Each foundation plate has a toothed rack. The toothed racks of each pair of bottom plates engage a common pinion set up on the tubular shaft. The radial distance of each base plate is altered by a screw and the racks and pinion be sure that the radial adjustment can be exactly the same for each person in the same pair of base plates. Make use of – Milling cutters for woodworking planetary gearbox devices.
Linear motion is usually indispensable to shifting machines; it transports equipment and products efficiently and controllably. The mechanisms that generate linear movement are generally ranked by their axial velocity and acceleration, axial forces versus structural volume, life, gear rack for Material Handling Industry rigidity, and positioning precision.
Two common linear systems are linear motors and ballscrew drives. Rack-and-pinion drives are often overlooked as past-era technology with limited positioning precision. However, this assumption is invalid.

Precision-ground mounting areas to tight tolerances, wear-resistant surface remedies, individually deburred equipment teeth, and compact, low-mass styles are boosting performance. In fact, rack-and-pinion drives evaluate favorably to linear motors in addition to roller or ground-thread ballscrews.
New-generation rack-and-pinion systems provide high dynamic functionality and unlimited travel range. Some include high quality servogears and actuators with backlash less than 1 arc-min., effectiveness to 98.5%, and far more compact sizes than regular servomotor-gear combinations. Some preassembled gear-pinion units can even run true to 10 µm, for protection and smooth motion.

Tags:

Find us

Ep Screw Jack Co., Ltd.

Mail: [email protected]

As one of leading manufacturers, suppliers and exporters of mechanical products in China, We offer reducers, sprockets, industrial and conveyor chain, belts, pulleys, gears, racks, gearboxes, motors, PTO Shafts, taper lock Bushing, vacuum Pumps, screw air compressors and many other products. Please contact us for details.

Recent Posts