admin

February 5, 2021

Why Coupling Grease?
Sufficient lubrication is crucial for satisfactory gear coupling operation. Gear Coupling Grease is particularly built for gear coupling applications to improve coupling lifestyle although drastically lowering upkeep time. Its large viscosity base oil and tackifier combine to keep the grease in location and stop separation and it’s in total compliance with NSI/AGMA 9001-B97 lubrication suggestions.
Coupling Grease is dark brown in shade and manufactured by using a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to substantial centrifugal forces ordinarily discovered in couplings. Bearing or general objective greases tend to separate and get rid of effectiveness as a consequence of substantial centrifugal forces within the various ingredients at large rotational speeds. These high centrifugal forces encountered in couplings separate the base oil from the thickeners. Heavy thickeners, which have no lubrication characteristics, accumulate in the gear tooth mesh region leading to premature coupling failure. Gear Coupling Grease is intended to extremely resistant to centrifugal separation in the oil and thickener, which lets the lubricant to become utilised for a somewhat long time period of time.
One of the secrets and techniques to the good results of Gear Coupling Grease will be the variable consistency through the entire operating cycle on the application. The consistency of our gear coupling grease alterations with all the working conditions. Operating on the lubricant beneath real service conditions triggers the grease to develop into semi-fluid, functionally solash lubricating the put on surfaces in the coupling. Since the grease cools, it returns to your unique consistency, thereby preventing leakage.
Gear Coupling Grease is available from stock in 14 oz. cartridges, 1 lb. and 5 lb. cans.
Features
Minimizing of coupling wear
Resistance to water washing
Corrosion and rust protection
Large load carrying capabilities
Extended relubrication frequency
Use at temperatures up to 325° F
Staying in location below higher speeds
Resistance to centrifugal separation
Reduction in down time & maintenance cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and one. This grease is specially formulated having a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.