admin

February 2, 2021

FMM Sort Mill Couplings
The FMM Kind coupling includes 1 conventional flex hub, a single universal straight bored hub as normal, two sleeves and 1 accessory kit. This coupling is provided with exposed bolts as normal. Shrouded bolts are available on request by size 5.5.
Options
For lengthy daily life
Standard 20° stress angle
Heat treated bolts for higher strength
Corrosion resistant bolts and nuts for ease of maintenance
Delivers parallel, angular misalignment and end float
Flex Half coupling interchangeable with market standards
Extended Universal Hub provided to customer specifications with straight or tapered bores
Ordering Information and facts
Application: Driver and Driven.
Type and dimension of coupling, horizontal, vertical etc.
Power: Motor horspower or torque necessity.
Velocity: Motor RPM or Driven RPM.
Distance concerning shaft ends (BSE).
Shaft sizes.
Taper per foot and length of taper if tapered bore is required.
Specify counterbore dimensions if preferred.
Submit a drawing if accessible.

FHDFS Form Floating Shaft Couplings
The FHDFS Type coupling consists of two flex-rigid couplings and one particular floating shaft. The coupling is supplied with the rigid hubs outboard except if otherwise specified. The coupling includes exposed bolts only.
Capabilities
Flex Hubs for extended existence
Typical 20° stress angle
Heat treated bolts for higher strength
Corrosion resistant bolts and nuts for ease of maintenance
Accommodates parallel and angular misalignment
Removal of center assembly makes it possible for forease of upkeep devoid of repositioning machinery
Rigid hubs outboard makes it possible for for larger shaft diameters
Developed for high-torque low-speed applications that occur in mill operations
Ordering Information and facts
Application: Driver and Driven.
Variety and dimension of coupling, horizontal, vertical and so forth.
Energy: Motor horspower or torque necessity.
Velocity: Motor RPM or Driven RPM.
Distance between shaft ends (BSE).
Connecting gear shaft sizes.
Specify which hubs are for being employed around the products (Rigid or Flex).
Rigid hubs will probably be used to the gear except if otherwise specified.
Length of floating shaft could have an effect on max angular misalignment.